钻井工程常用名词术语汉英对照表 钻井工程

admin

钻井工程常用名词术语汉英对照表
钻井工程常用名词术语
钻井总论
钻井drilling  
钻井方法drilling  method  
顿钻钻井cable drilling
杆式顿钻rod  tool  drilling  
绳式顿钻cable  tool  drilling
轻便钻井portable  drilling  
直井straight  hole
深井deep  well
超深井super deep well   
地热井geothermal  well  
热采井thermal production  well  
工程井engineering  rejection well
工程报废井abandoned  well  
弃井abandoned  well  
钻井设计well design  
钻井质量drilling  quality  
岩石的物理机械性质physical-mechanical  properties of rock   
矿物的微硬度  micro-hardness  of  rook
肖氏岩石硬度  Shores  hardness  
史氏岩石硬度  Shi's  hardness
矿物的弹性模量elastic  modulus  of  mineral
岩石的弹性模量elastic  modulus  of  rock
矿物的泊松比Poissons  ratio  mineral
岩石的泊松比Poissons  ratio  rock
矿物的切变模量shear  modulus  of  mineral
岩石的切变模量shear  modulus  of  rock
矿物和岩石的体积压缩模量bulk compressibility mineral  and  rock
岩石的体积压缩系数coefficient of bulk compressibility mineral  and  rock
岩石的抗拉伸强度tensile strength of rock
岩石的直接拉伸试验 direct tensile test of rock
岩石的巴西劈裂拉伸实验Brazilian test of rock
岩石的筒形抗内压胀裂试验 burst test of hollow cyling by internal pressure
岩石的常规抗压缩强度 compressive strength of rock
岩石的抗剪切强度 shear strength of rock
岩石的抗剪切强度试验 shear test of rock
岩石的三轴强度试验 tri-axial test of rock
岩石的常规三轴试验 ordinary tri-axial test of rock
岩石的真三轴试验 true tri-axial test of rock
脆性岩石 brittle rock   
塑性岩石plastic rock
岩石的假塑性破坏pseudo-plastic breakage of rock
岩石塑性系数coefficient of plasticity of rock
岩石的脆塑性转变压力（临界压力）brittle plastic transitional pressure of rock
岩石的库仑纳维尔强度准则Conlomb-Navier strength criterion of rock
岩石的内磨擦角和内磨擦系数angle of interal friction and coefficient of interal friction of rock
岩石的莫尔强度准则 Mohr strength criterion of rock
岩石的格里菲斯脆性破坏准则 Griffith criterion of brittle failure of rock
统计强度理论statistical strength theory
岩石的表面破碎surface fracture of rock
岩石的疲劳破碎fatigue fracture of rock
岩石的体积破碎volumetric fracture of rock
岩石的单位体积破碎pecific volumetric fracture work of rock
地应力in situ stress
岩层的水平测向应力horizontal stress of strata
测向系数coefficient of lateral pressure
围压confining pressure   
有效应力effective stress
压持效应chip hold effect   
岩石硬度减低剂rock hardness reducer
岩石的可钻性drill ability of rock  
岩石的研磨性rock abrasiveness
钻具drilling tool  
钻柱drill stem   
复合钻柱combination string
满眼钻柱packed hole assembly
踏式钻铤组合tapered drill collar string
钟摆钻具pendulum assembly   
偏重钻铤  unbalanced drill collar
钻柱弯曲buckling of drill string
钻具的扭转震动twisting vibration of drill string
钻杆疲劳破坏fatigue-failure of drill string  
上紧矩 make-up torque
应力减轻槽stress-relief groove      
减震器vibration dampener
稳定器stabilizer   
井眼大扩器reamer   
钻井液drilling fluids
水基钻井液water-base drilling fluids
淡水钻井液fresh-water drilling fluids
低固相钻井液low solids fluids
低固相不分散钻井液low solids non-dispersed polymer drilling fluids
抑制性钻井液inhibitive drilling fluids
盐水钻井液salt-water drilling fluids
饱和盐水钻井液saturated salt-water drilling fluids
钙处理钻井液calcium treated drilling fluids
钾盐钻井液potassium drilling fluids
混油钻井液oil-emulsion drilling fluids
生物聚合物钻井液biodegrability drilling fluids
油基钻井液oil base drilling fluids
反相乳化钻井液invert-emulsion drilling fluids
平衡活度钻井液balanced activity drilling fluids
泡沫钻井液foam drilling fluids        
密闭液sealing fluids
完井液completion fluids              
封隔夜packer fluids
解卡浸泡液stuck freeing spotting fluids
钻井液性能properties of drilling fluids
滤失filtration                  
API滤失量API filtration
高温高压滤失量high temperature and high pressure filtration
动滤失量dynamic filtration   
滤饼filter cake  
含砂量sand content
钻井液固相含量solids content in drilling fluids
亚甲基兰实验methylene blue test
石灰含量lime content estimation
钻井液的酚酞碱度Pm alkalinity      
滤液酚酞碱度Pt alkalinity
滤液甲基橙碱度Mf alkalinity      
造浆率yield
破乳电压emulsion-breaking voltage
钻井液流变性drilling fluids rheology   
漏斗粘度funnel viscosity
触变性thixotropic behavior           
静切力gel strength
初切力initial gel strength            
终切力10-minuto gel strength
剪切降粘特性shear-thinning behavior
钻井液受污染contamination of drilling fluids
粘土侵clay contamination         
盐侵salt contamination
盐水侵salt water contamination      
钙侵calcium contamination
砂侵sand contamination            
水侵water contamination
气侵gas contamination            
钻井液处理剂mud additives
降失水剂filtrate or reduction agents   
增粘剂thickening agent
膨润土增效剂agents of increasing bentonite
降粘剂thinning agents               
加重剂weighting agents
堵漏剂lost circulation materials   
水敏性页岩water-sensitive shale
膨润土的预水化pre-hydrated bentonite   
固相控制solid control
钻屑cutting      
砂sand     
泥silt   
胶体颗粒colloidal solids
钻进drilling   
钻进技术drilling technology
钻进技术参数drilling parameters         
钻压weight on bit
悬重和钻重string suspending weight and drilling weight
转速rpm-revolution per minute         
排量rate of flow
零轴向点zero axial stress point         
中性点neutral point
开钻spud in     
完钻finishing drilling   
送钻bit feed
方余和方入kelly-up and kelly-in         
进尺footage
机械钻速penetration rate   
鳖钻bit bouncing   
跳钻bit jumping
干钻drilling at circulation break      
打倒车reverse rotation table
钻头泥包bit balling   
划眼redressing     
扩眼reamin1
放空drilling break   
吊打easing the bit in   
纠斜hole straightening
侧钻sidetracking     
单根single         
双根double
立根stand     
接单根king a connection      
起下钻trips
知起下钻short tripping        
活动钻具move the drill string
上卸扣make up and break out     
换钻头change bit
鼠洞rat hole     
小鼠洞mouse hole   
喷射钻井jet-bit drilling
射流jet flow   
冲击射流impact jet flow  
汽蚀射流cavitation jet
射流扩散角和扩散系数spread angle and spread coefficient of jet
射流等速patential core of jet  
漫流cross flow   
射流喷速jet velocity
射流速度降低系数decreasing coefficient of jet velocity
射流动压力dynamic pressure of jet flow
射流压力降低系数coefficient of jet-flow pressure drop
射流冲击力jet impact force   
射流水功率jet hydraulic-power
喷射距离jet length           
清洗井底bottom-hole cleaning
钻头压降bit pressure-drop   
钻头水功率bit hydraulic horse-power
喷嘴nozzle         
等变速喷嘴nozzle with iso-variable velocity
流线形喷嘴streamline nozzle  
喷嘴流量系数nozzle orifico coefficient
钻井液循环系统drilling fluids circulating system
钻井液流态flow pattern   
平板层流flat plate laminar flow
Z值Z-value   
喷射钻井的工作方式The working regime of jet drilling
最大钻头水功率工作方式The regime of the maximum bit hydra-ulic horse-power
最大射流冲击力方式the regime of the maximum jet-impact force
最大射流喷速工作方式The regime of the maximum jet velocity
经济水功率工作方式the regime of the economic hydraulic horse-power jet bit                     
喷射式钻头optimum rate of mud flow
最优喷嘴直径optimum nozzlo diameter
临界井深和极限井深critical well depth and limited well depth
钻井泵的工作状态the working regime of drilling pump
钻井泵的最大排工作状态（额定工作功率工作状态）the maximum flow rate regime of the drilling pump (the rated power regime of the drilling pump)
钻井泵的调节排量工作状态（允许压力工作状态）the regulated flow rate regime of the drilling pump(the rated power regime of the drilling pump)
携带岩屑cutting carrying   
岩屑运移比cutting transport ratio
环空岩屑浓度solid concentration in annular space
钻井泵效率rate of utilized power of the drilling pump
钻井泵水功济利用率rate of utilized hydraulic power of the drilling pump
优化钻井技术optimum drilling technology  
控制井control well
钻井可控参数controllable drilling variables
钻井不可控参数non controllable drilling variables
钻井目标函数（钻井泛函）objective function of drilling procedure
钻进过程的数学模型mathematical model for drilling procedure
钻速方程equation for drilling rate
二元钻速方程drilling rate equation in two variables
多元钻速方程multi-variable drilling rate equation
最大允许钻压maximum allowable weight on bit
最优钻压optimum weight on bit   
钻速系数factor of penetration rate
地层研磨性系数factor of formation abrasiveness
牙齿磨损系数tooth wear coefficient
轴承工作系数working coefficient of bearing
五点法钻速试验“five spot” drill-off test
井下动力钻井hole bottom power drilling
涡轮钻井turbo-drilling  
涡轮钻具turbo-drill  
电动钻具electric drill
螺杆钻具positive displacement motor
涡轮工作特性characteristics of turbine
涡轮的水力载荷hydraulic load on turbo-drill
涡轮钻具井底工作特性hole-bottom working characteristics of turbo-drill
涡轮钻具最优工作区optimized working zone of turbo-drill
涡轮钻具合理转速optimum revolution of turbo-drill
涡轮钻具最优排量optimum capacity of turbo-drill
涡轮不稳定工作区unstable working range turbo-drill
有效钻压effective bit-weight
涡轮钻具井底功率传递系数transfer coefficient of bottom hole power of turbo-drill
涡轮钻具特性系数characteristic coefficient of turbo-drill
涡轮的水力效率hydraulic efficiency of turbo-drill
涡轮钻具合理钻进深度optimum drill depth of turbo-drill
涡轮-泵组联合特性combined characteristics of turbo-drill-pump
涡轮钻具轴向间隙的调节axial clearance regulation of turbo-drill
钻具滤清器drill pipe filter           
启动阀starter gate valve
低速大扭矩涡轮钻具love-speed high-torque turbo-drill
复式涡轮钻具compound turbo-drill
定向井directional well
定向要素directional elements
井斜角inclination
方位角azimuth     
井斜变化率rate of inclination change
方位变化率rate of azimuth change   
井眼曲率hole curvature
垂深和测深vertical depth and measured  
水平投影长度hole deviation
水平位移displacement or closure distance   
多底井multi-bore well
水平井horizontal well   
丛式井cluster well or multiple wells      
救除井relief well      
双筒井dual wells
套管开窗starting window on casing  
造斜 deflecting or building angle
增斜increasing hole angle or build-up hole angle
降斜decreasing hole angle or build-off hole angle
稳斜  maintain angle   
井身垂直投影图vertical projection of borehole
井身水平投影图 horizontal projection of borehole
正切法tangential method     
平衡正切法balanced tangential method
平均角法average angle method
曲率半径法radius of curvature method
圆弧法arc method        
最小曲率法minimum curvature method
圆柱螺线法cylinder helix method  
悬链线轨迹·catenary shape profile
控制圆柱control cylinder         
造斜工具deflecting tool
槽式变向器whip-stock            
短涡轮short turbo-drill
钻铤造斜短节short bent collar     
涡轮偏心短节turbo-eccentric sub
复式弯涡轮bent multi-turbo-drill
水力斜接头hydraulic bent sub Dyna-flex     
瓦片变向器rebel tool 造斜工具面tool face      
造斜率rate of over-all angle change
井眼方位漂移walk of hole     
装置角tool of rotation
工具面角tool face azimuth   
动力钻具反扭角reactive torque
定向方位角tool face bearing or tool face setting
磁偏角magnetic declination
随钻测量measurement while drill(MWD)
单点测斜仪single shot instrument
多点测斜仪multi-shot instrument  
陀螺测斜仪gyroscopic instrument      
定向orientation
定向下钻orientation while going in hole
磁力定向法magnetic orientation method
斜口管鞋定向法mule-shoe orientation method
取心coring  
岩心core   
岩心收获率recovery  of core
取心方法coring method
局部反循环取心coring with local inverse circulation
长筒取心core drilling with long core barrel
密闭取心sealing core drilling
保压取心core drilling with keeping formation pressure
定向取心orientation coring         
绳索取心wire line coring
取心工具coring tools              
岩心筒core barrel
单筒式岩心筒single type core barrel
双筒式岩心筒core barrel of double tube swivel type
内岩心筒inside core barrel         
外岩心筒outside core barrel
喷射式岩心筒core barrel of jet type     
取心钻头coring bit
牙轮取心钻头coring cone bit  
金钢石取心钻头diamond coring bit
硬质合金取心钻头hard metal coring bit
涡轮取心钻头turbo-core bit
涡轮取心钻具turbo-core drill     
岩心爪core gripper
卡瓦式岩心爪core gripper with slip
卡簧式岩心爪core gripper with slip-spring
板簧式岩心爪卡core gripper with slip-spider
箍式岩心爪core gripper with slip-collar
割取岩心core breaking
机械加压割心法core breaking by mechanical loading
投球割心core breaking by hydraulic pressure
投砂割心core breaking by pumping down
顶岩心core extracting
各种压力概念concept of pressure   
静液压力hydrostatic pressure
钻井液压力drilling fluid column pressure
孔隙压力pore pressure (formation pressure)
上覆岩层压力overburden pressure   
颗粒压力grain to grain pressure
压力梯度pressure gradient   
压力监控pressure detection and control
异常压力及其形成abnormal pressure and it’s formation
压力异常abnormal pressure      
压实作用compaction
欠压实imcompaction   
不渗透围栅·permeabillity barrier
快速沉积rapid deposition
构造型异常高压structural abnormal pressure
地层压力检测方法method of formation pressure detection
地震资料法seismic data method
机械钻速法penetration rate method
d指数法d-exponent method  dc
指数法 dc-exponent method
标准化钻速法normalized penetration rate
页岩密度法shale density
溢流观测法take a kick   
天然气录井检测法gas logging
氯化物检测法chloride log     
钻井液录井法drilling fluid log
返出钻井液温度检测法flow-line temperature
化石资料法paleo-information  
地球物理检测法wire-line logs
中途测试drill-stem testing  
完井测试well completing test
综合录井仪computerlized apply drilling technology
地层破裂压力formation fracture pressure
地层破裂压力预报方法formation fracture pressure prediction
漏失试验法leak-off test
胡伯特-威利斯法 Hubbert and Willis approach
马修斯-凯利法method of Matthews and Kelly
伊顿法method of Eaton      
安德森法Anderson’s  method
艾克斯劳格法Exlog method      
黄荣樽法Huang’s method
地层井眼系统的压力平衡balance of formation-borehole system
地层压力当量钻井液密度equivalent drilling fluid density
钻井液当量循环密度equivalent circulating  density
附加压力当量钻井液密度additional pressure equivalent density
当量深度equivalent depth   
钻柱排代量drilling fluid displacement
波动压力（激动压力）surge pressure   
抽汲压力swabbing pressure
气体上窜gas channeling
天然气偏差因子the coefficient of gas compressibility
溢流overflow   
井涌kick   
井喷well blowout
地下井喷underground blowout   
井喷失控out of control for blowout
循环池液体增量pit gain        
压力过渡带pressure transition zone
压井killing well  
关井closing well   
硬关井hard closing
软关井soft closing   
压井方法killing well method
工程师法（等待加重量法）engineer’s method
司钻法（二次循环法）driller’s method
边加重边循环法concurrent method     
空井压井empty well control
置换式压井法（顶部压井法）displacement method
反循环inverse circulating     
循环周circulating circle
节流循环circulating with choke
防喷设备和工具blowout prevention tools and equipments
防溢管 ·bellnipple   
钻井液流量计drilling fluid flowing indicator
泵冲数计pump-stroke counter
钻井液液面指示器pit-volume indicator
真空除气器 ·vacum degasser     
硫化氢监测仪H2s detector
井控模拟装置well control simulator
井喷失控的处理well blowout control   
抢装井口installing wellhead
扣装法抢装井口buckling-up-installing wellhead
翻转法抢装井口turning-up-installing wellhead
整体吊装法抢装井口whole hanging method for installing wellhead
带帽子压井法·hatting kill well method
下封隔器压井killing well with packer method
换井口套管casing replacing     
灭火extinguishing
喷射水流灭火法jet fire extinguishing method
爆炸灭火法explosion method     
灭火剂extinguisher
固井well cementing   
套管程序casing program     
导管conductor
表层套管surface casing   
技术套管intermediate casing strings
生产套管production casing   
套管柱casing string
套管柱下部结构casing accessories   
引鞋guiding shoe
套管鞋casing shoe   
套管扶正器centralizer   
泥饼刷wall scratcher
浮籀float collar  
套管承托环cement baffle collar
旋流短节vortex sub
浮鞋cementing float collar   
水泥伞cementing basket
注水泥胶塞cementing plugs   
通径规drift diameter gauge
套管的外载荷outside casing load   
套管内压力burst
套管外挤压力collapse pressure   
套管轴向力axial load
套管强度casing strength   
套管抗挤强度collapse resistance
套管抗拉强度tensile resistance  
套管抗内压强度burst resistance
下套管running casing   
活动套管moving casing
预应力preceding stress     
人工井底artificial bottom of a well
磁性定位短节magnetic locator sub   
固井工具与设备tools and equipments for running casing and cementing
套管吊钳casing tong   
套管吊卡casing elevator
卡盘casing spider   
联顶节top connecting collar
水泥头connect head   
水泥车connecting truck
井口装置wellhead equipment   
注水泥?connect
油井水泥oil well connecting   
低密度水泥light weight connect
膨润土水泥·bentonite connect   
速凝水泥accelerated cement
膨胀水泥expansion cement     
纤维质水泥fiber cement
树脂水泥（浆）resin cement     
油基水泥（浆）diesel-oil cement
橡胶水泥（浆）latex cement   
酸溶性水泥acid dissoluble cement
石膏水泥混合物·gypsam cement   
火山灰水泥·pozzolan cement
抗盐水泥salt-resisting cement   
双凝水泥浆separable setting cement slurry
冷井水泥和热井水泥ordinary and hot cement
API水泥分级API cement classification
水泥浆性能及其调节cement properties and adjustments of them
稠度仪consist-meter     
水泥浆流动性mobility of slurry
水泥浆密度slurry density   
水泥浆滤失量slurry filtration
出口温度井底温度和循环温度flow-line temperature bottom temperature and circulation temperature
水泥浆失重losing weight slurry     
水泥石强度cement strength
水泥石渗透性permeability of set cement
水泥石的射孔性perforating quality   
水泥浆外加剂cement additive
速凝剂accelerator  
缓凝剂retardant   
减阻剂friction reducer
降密度剂light weight additive   
降失水量filtrate reducer
水泥浆加重剂heavy weight additive  
隔离液spacer fluid
前置液ahead fluid   
尾随液tail fluid
注水泥方法cementing methods
常规注水泥法typical primary cementing
双级注水泥法two stage cementing
插入注水泥法inner pipe cementing
多管注水泥法multi-plezone completion cementing
打水泥塞cementing plug
平衡法打水泥塞balance method for cementing plug
倾筒法打水泥塞dump bailer method   
挤水泥squeeze method
井口挤水泥法braden head squeeze method
封隔器挤水泥法squeeze packer method
高压挤水泥法high-pressure squeeze method
低压挤水泥法low-pressure squeeze method
尾管固井drilling liner cementing   
尾管悬挂器drilling liner hanger
窜槽cement channeling   
完井方法completion methods
裸眼完井法open hole completion  
先期裸眼完井法initial open hole completion
后期裸眼完井法final open hole completion
射孔完井法perforation completion
单管射孔完井法single pipe perforation completion
多管射孔完井法multiple pipe perforation completion
无油管完井法·tubingless completion
永久完井法permanent completion
无封隔器单层永久完井法single pipe permanent completion without packer
单封隔器永久完井法permanent completion with single packer
封隔器射孔完井法permanent completion with packer
负压射孔perforating with negative pressure
过油管射孔perforating through tubing
贯眼完成法perforated pipe completion
衬管完井法liner perforation completion
砾石充填完井法gravel packer completion
深井完井法deep hole completion
高含硫气井完井法high H2s gas well completion
地层损害程度formation damage degree
地层损害带formation damage zone
水动力学程度不完善井hydrodynamic degree incompleteness well
水动力学性质不完善井油井hydrodynamic property incompletion well
完善系数well completeness factor   
损害比damage ratio
趋肤效应shin effect   
开采比production ratio
损害系数damage factor   
完井系数completion factor
钻井设备drilling equipment  
设备安装rig up
钻前工作preliminary work for spudding  
井场布置layout
平井场levelling  
圆井cellar   
基础ground foundation base
活动基墩removable foundation   
井架安装derrick installation
扒杆gin pole  
井架安装绞车winch  
穿钢丝绳string up
死绳固定器dead line anchor   
设备校正alignment
井口找中center for well   
整体搬迁skidding the rig
成组安装package installation   
泥浆管汇mud pipeline
猫头绳cat-line  
高悬猫头绳drill rope
大钳尾绳safety line   
大门绷绳front guy(lines)
井架绷绳derrick guy   
接链器chain spanner
钻井数据系统drilling data system
钻井数据采集装置drilling data acquisition
钻井数据实时处理装置drilling data processing
钻井数据库drilling data base   
钻井信息drilling information
钻井参数传感装置drilling parameter sensing unit
指重表传感器weight sensor   
进尺传感器drilling footage sensor
转盘扭矩传感器rotary table torque sensor
转盘转速传感器R.P.M sensor for rotary table
大钳扭矩传感器torque sensor for tong  
泵速传感器pump rate sensor
钻井液密度传感器drilling fluid weight sensor
钻井液液面传感器mud pit level sensor
钻井液流动传感器drilling fluid flow sensor
钻井液温度传感器drilling fluid temperature sensor
钻井液电导传感器drilling fluid conductivity sensor   
录井logging
钻井液录井drilling fluid logging
岩样录井·lithologic logging   
气测录井gas-logging
钻速录井penetration rata logging   
综合录井compound logging
巡回检测cyclic detection   
泵压表pressure gage
钻具事故drilling pipe and tools accident   
顿钻drill string free fall
溜钻drill string not well braked      
断钻具drilling pipe breaking
落鱼fish  
落物junks  
打捞作业fishing   
打捞筒overshot
打捞杯fishing cup  
反循环打捞篮junk basket with reverse circulation
壁钩wall hook  
铅印模lead stamp   
一把抓catchall  
铣鞋mill shoe
钻杆外割刀external cutter  
活动肘节knuckle
倒扣捞矛left hand fishing spear   
弯钻杆bend drill pipe
尖钻头tip bit   
卡钻drill pipe sticking   
砂桥卡钻sand bridging
键槽卡钻key seating   
压差卡钻differential sticking
地层膨胀卡钻formation swelling sticking
地层坍塌卡钻formation collapse sticking
钻头泥包卡钻balling-up sticking   
点sticking point
解卡工具releasing tools   
震击器bumper   
下击器bumper jar
上击器top jar   
地面下击器surface bumper jar   
千斤顶jack
爆炸松扣break-outing pack of dynamite
测卡仪sticking-point-instrument   
解卡方法releasing method
震击解卡法releasing stuck tamping   
油浴解卡法releasing stuck by pump oil into the annuls
酸浴解卡法releasing stuck by acidding
割铣解卡法releasing stuck by cutting
套铣解卡法milling and breakout
爆炸解卡法explosion releasing method   
跳槽·netch jumping
粘扣thread gluing  
滑扣thread slipping   
脱扣thread off
错扣thread alternating  
对扣make-up   
造扣thread making
顶天车crashing into the crown  
磨蚀钻井abrasive cutting drill
弹丸钻井bullet-shot drill   
电火花钻井electric spark drill
超声波钻井supersonic wave drill   
火焰钻井flame-jet drill
电加热钻井electric heating drill   
原子能钻井atomic energy drill
电弧钻井electric arc drill        
等离子钻井plasma jet drill
电子束钻井electron-beam drill   
激光钻井laser drill
化学腐蚀钻井chemical erosion drill
钻井技术经济指标tech-economic indication of drilling
开钻井口数spudding well number   
完钻井口数drilled well number
完成井口数completed well number   
钻井进尺drilling footage
取心进尺coring footage
井身质量合格率well bore quality qualified ratio
油层固井合格率oil reservoir well quality qualified ratio
钻井工程报废drilling engineering abandonment
报废井段abandoned range
报废进尺abandoned footage
钻机利用率rate rig utilization
钻机台月rigs per unity month
建井周期台月construction cycle per unity month
纯钻井时间reciprocating time
钻机月速度monthly drilling rate
周期钻速periodic drilling rate
纯钻速rate of penetration
行程钻速drilling rate of a trip
建井周期construction cycle
完成井平均建井周期average construction of completed well
完成井平均井深average well depth of completed well
完成井平均进尺average bit drilling footage of completed well
钻井时效分析drilling prescription analysis
进尺工作时间footage working time
固井工作时间cementing working time
辅助工作时间service working time
事故损失时间accident losing time
修理时间repairing time
组织停工损失时间management down time loss
处理复杂情况时间problem handling time
生产时间率production per cent age
纯钻进时间率reciprocating time ratio
每钻机台月耗柴油量diesel consumption per rig-month
每钻机台月耗机油量oil consumption per rig-month
钻井工程成本cost of drilling engineering

shiyouman

thanks very much